Quanta QuantaMesh T5016-LB8D

Availability: In stock

QuantaMesh 5000 Series T5016-LB8D


A powerful Top-of-Rack Switch for Cloud Datacenters


The QuantaMesh T5016-LB8D is a high performance and low latency layer 2/3/4 Ethernet switch with 16 40GbE QSFP+ ports in a compact rack unit size. Each 40 Gigabit Ethernet port can be independently configured as 40GbE or 4 x 10GbE for total 64 ports of 10GbE.


Simplicity


The QuantaMesh T5016-LB8D can be managed through an industry standard command-line Interface (CLI) which reduces training and operating costs. A user friendly Web GUI is provided via a standard Web browser for switch management. The QuantaMesh T5016-LB8D also supports Simple Network Management Protocol (SNMP) both from standard MIB and private MIB for easy configuration, monitoring, and remote management by the network administrator. The Auto-Installation feature implemented in the QuantaMesh T5016-LB8D helps centralized management to simplify deployment of a truly plug-and-play experience. With the evolution from IPv4 to IPv6, the QuantaMesh T5016-LB8D is a IPv6 integrated management device.


The QuantaMesh T5016-LB8D is designed for high availability from both hardware and software perspective. Key features include:



  • 1+1 hot-swappable power supplies

  • Out-of-band management supported

  • 802.1D, 802.1w, and 802.1s supported

  • Up to 8 ports per link aggregation group (LACP) and up to 64 groups

  • Multi-chassis LAG (MLAG) for preventing the risks of single point failure

  • Up to 32 paths ECMP routing for load balancing and redundancy

  • Virtual Router Redundancy Protocol supported


High-Performance L2/L3 access deployments


With 16 QSFP+ ports in the front panel and in the compact 1U form factor, front to back or back to front airflow design, the QuantaMesh T5016-LB8D is ideal for top-of-rack deployments in high-performance, highly demanding datacenters. The 1.28 terabits per second switching capacity and 960Mpps forwarding rate with low power consumption make the QuantaMesh T5016-LB8D a powerful solution to aggregate high-performance servers in the datacenter.


Advanced IPv4 and IPv6 routing


The QuantaMesh T5016-LB8D is a fully layer 2 and layer 3 routing switch that supports advanced IPv4 and IPv6 routing features such as RIP v1/v2, OSPF/ECMP, RIPng and OSPFv3. The multicast routing features for IGMP v1/v2/v3, DVMRP, PIM-DM/SM, MLD v1/v2 and PIM-DM6/SM6 are all supported in the QuantaMesh T5016-LB8D.


Datacenter application


The QuantaMesh T5016-LB8D is a special IEEE DCB-based switch delivering a high-performance solution to integrate server edge access. The key features include:



  • Congestion Notification (CN, 802.1Qau)

  • Enhanced Transmission Selection (ETS, 802.1Qaz)

  • Priority-based Flow Control (PFC, 802.1Qbb)

  • Datacenter Bridging Extension (DCBX, 802.1Qaz)

  • FCoE Initiation Protocol (FIP) snooping

Product Code: T5016-LB8D

Brand Quanta

Details

QuantaMesh 5000 Series T5016-LB8D

A powerful Top-of-Rack Switch for Cloud Datacenters

The QuantaMesh T5016-LB8D is a high performance and low latency layer 2/3/4 Ethernet switch with 16 40GbE QSFP+ ports in a compact rack unit size. Each 40 Gigabit Ethernet port can be independently configured as 40GbE or 4 x 10GbE for total 64 ports of 10GbE.

Simplicity

The QuantaMesh T5016-LB8D can be managed through an industry standard command-line Interface (CLI) which reduces training and operating costs. A user friendly Web GUI is provided via a standard Web browser for switch management. The QuantaMesh T5016-LB8D also supports Simple Network Management Protocol (SNMP) both from standard MIB and private MIB for easy configuration, monitoring, and remote management by the network administrator. The Auto-Installation feature implemented in the QuantaMesh T5016-LB8D helps centralized management to simplify deployment of a truly plug-and-play experience. With the evolution from IPv4 to IPv6, the QuantaMesh T5016-LB8D is a IPv6 integrated management device.

The QuantaMesh T5016-LB8D is designed for high availability from both hardware and software perspective. Key features include:

  • 1+1 hot-swappable power supplies
  • Out-of-band management supported
  • 802.1D, 802.1w, and 802.1s supported
  • Up to 8 ports per link aggregation group (LACP) and up to 64 groups
  • Multi-chassis LAG (MLAG) for preventing the risks of single point failure
  • Up to 32 paths ECMP routing for load balancing and redundancy
  • Virtual Router Redundancy Protocol supported

High-Performance L2/L3 access deployments

With 16 QSFP+ ports in the front panel and in the compact 1U form factor, front to back or back to front airflow design, the QuantaMesh T5016-LB8D is ideal for top-of-rack deployments in high-performance, highly demanding datacenters. The 1.28 terabits per second switching capacity and 960Mpps forwarding rate with low power consumption make the QuantaMesh T5016-LB8D a powerful solution to aggregate high-performance servers in the datacenter.

Advanced IPv4 and IPv6 routing

The QuantaMesh T5016-LB8D is a fully layer 2 and layer 3 routing switch that supports advanced IPv4 and IPv6 routing features such as RIP v1/v2, OSPF/ECMP, RIPng and OSPFv3. The multicast routing features for IGMP v1/v2/v3, DVMRP, PIM-DM/SM, MLD v1/v2 and PIM-DM6/SM6 are all supported in the QuantaMesh T5016-LB8D.

Datacenter application

The QuantaMesh T5016-LB8D is a special IEEE DCB-based switch delivering a high-performance solution to integrate server edge access. The key features include:

  • Congestion Notification (CN, 802.1Qau)
  • Enhanced Transmission Selection (ETS, 802.1Qaz)
  • Priority-based Flow Control (PFC, 802.1Qbb)
  • Datacenter Bridging Extension (DCBX, 802.1Qaz)
  • FCoE Initiation Protocol (FIP) snooping

 

 

Physical ports

Port configuration

16 40GbE QSFP+ ports

Management Port

Out-of-band management port (RJ-45, 10/100/1000Base-T)

Console Port

1 (RJ-45)

 

Performance

Switching capacity

1.28Tbps

Maximum forwarding rate

952Mpps

Latency

<1.2us

Memory

2GB

Flash

64MB

MAC

128K

Stoage

2GB Micro SD

 

Layer 2 Features

Switching Mode

Store-and-Forward

Spanning Tree

802.1D, 802.1w & 802.1s 
Fast Forwarding 
Edge Port 
Loop Guard 
BPDU Filter/Guard 
Auto Edge 
TCN Guard 
Root Guard

VLAN

IEEE 802.1Q Tagged Base 
Port-Based 
Private VLAN 
802.1v Protocol VLAN 
MAC-Based VLAN 
IP-Subnet VLAN 
VTP v1/v2 
QinQ

Storm Control

Broadcast 
Unknown Multicast 
DLF (Unknown Unicast)

IGMP Snooping

v1/v2/v3 
v1/v2 Querier 
Immediate Leave

Link Aggregation

802.3ad with LACP (64 groups) 
Static Trunk 
Unicast/Multicast Traffic Balance over Trunking Port 
LACP Fallback

Multi-chassis LAG (MLAG)

Link State

Port Backup

Error-Disable Recovery

 

QoS Features

Scheduling for priority queue

WRR, Strict, and Hybrid

COS

802.1p, IP TOS precedence, & DSCP

DiffServ

iSCSI optimization

Auto VoIP

Port rate limit

 

Security Features

static and dynamic port security (MAC-based)

802.1x

Port-based, MAC-based, auto VLAN assignment, guest VLAN, unauthenticated VLAN

Access Control List

L2/L3/L4

IPv6 ACL

L3/L4

RADIUS

Authentication and accounting

TACACS+

Authentication

HTTPS and SSL

AES128-cbc, 3ES-cbc, Blowfish-cbc

SSH 1.5/V2.0

AES128-cbc, 3ES-cbc, Blowfish-cbc

User name and password

Local Authentication, Remote Authentication via RADIUS/TACACS+, AAA

Denial of Service control

Management IP filtering

SNMP/Web/Telnet/SSH

MAC filtering

IP Source Guard

Dynamic ARP inspection (DAI)

DHCP snooping

Web Authentication (Captive Portal)

 

Management Features

Industrial command-line interface

CLI filtering

Telenet/SSH

Software download/upload

TFTP, Xmodem, FTP, and SCP/SFTP

Configuration download/upload

TFTP, Xmodem, FTP, and SCP/SFTP

Dual Image

SNMP v1/v2c/v3

SNMP inform

v2/v3

RMON 1, 2, 3, & 9

BOOTP

client/relay

DHCP client

DHCP relay

DHCP L2 option 82 Relay

DHCP L3 option 82 Relay

EVENT/Error log

Local Flash

DNS client

DNS relay

Remote PING

Traceroute

SNTPv4

LLDP

802.1ab

CDP

UDLD

Port mirroring

SPAN

sFlow v5

Cable test

Email alerting

Auto Install

 

IPv6 Management

IPv4/IPv6 Dual Protocol Stack

ICMPv6

ICMPv6 Redirect

IPv6 Path MTU Discovery

IPv6 Neighbor Discovery

Stateless Autoconfiguration

Manual Configuration

DHCPv6

SNMP over IPv6

HTTP over IPv6

SSH over IPv6

IPv6 Telnet Support

IPv6 DNS Resolver

IPv6 RADIUS Support

IPv6 TACACS+ Support

IPv6 Syslog Support

IPv6 SNTP Support

IPv6 TFTP Support

Remote IPv6 Ping

 

Layer 3 Features

IP Multinetting/CIDR

/31 subnets

Proxy ARP

IRDP

Static route

RIP v1/v2

OSPF

ECMP

BGP4

IS-IS

IGMP v1/v2/v3

DVMRP

PIM-DM/-SM

VRRP

Source IP configuration

Policy-based routing

 

IPv6 L3 Features

OSPFv3

MLD v1/v2

PIM-DM6/-SM6

 

High Availability

Redundant power supply

1+1

Hot-swappable fan tray

4 fixed fan

Multi-chassis LAG

 

Data Center Features

Congestion Notification (802.1Qau)

Enhanced Transmission Selection (802.1Qaz)

Priority-based Flow Control (802.1Qbb)

DCBX

FCoE Initiation Protocol (FIP) snooping

EVB/802.1Qbg

 

Virtualization Features

VMTracer

 

Mechanical

Dimension (HxWxD)

42.8x435x393mm

Weight

7.3kg/16.09lbs (NET)

 

Environmental Specifications

Operating temperature

0~45°C

Operating humidity

90% maximum relative humidity

 

Electrical

Power requirement

100~240VAC, 50/60Hz

Power consumption

192 watts (L2 64B line rate; 10G-SR optics, 100% fan duty)

 

Safety

UL, cUL, CB, CCC

 

EMC

CE, FCC, VCCI, RCM, CCC

 

RoHS

Reduction of Hazardous Substances (RoHS) 6

 

 


Additional Information

switch software No
QSFP28 - 25GE N/A
QSFP28+ - 100GE N/A
Switch Silicon No
Switch CPU No
Manufacturer Quanta
QSFP+ - 40Ge 16
QSFP+ - 10Ge 64
RJ45 - 10Ge No
RJ45 - 1Ge No
SFP/SFP+ - 1Ge/10Ge No

Shipping anywhere worldwide

UPS - DPD - TNT - FedEx - DHL

Custom built servers

Servers are custom built to client specs

Online customer support

Extended warranty and support options

Xentech | SDN | Custom Built Servers | IT components